Abloy Lock Installation & Rekey in New York City, NY | Strongbox Lock & Safe Co. of New York City

Abloy Lock Installation & Rekey in New York City: What to Know First

We provide independent Abloy lock installation & rekey in New York City, typically same-day or next-day, with a flat price quoted on the phone before our truck rolls. Most Abloy rekeys run $140-$220; full installations with new hardware start around $280 and scale up with the series complexity. We’re not affiliated with Abloy - we work on their locks because we’ve spent decades learning what breaks and how to fix it right.

Call (877) 691-7931

This page is for New York City homeowners who already own Abloy hardware and need a technician who won’t treat it like a standard deadbolt. If your Protec2 cylinder is sticking, your Sento keypad won’t accept codes, or you’re moving into a new place and need the locks rekeyed, call (877) 691-7931. A live person answers, 24/7.

How Abloy Products Fail - and How We Fix Them

• Protec2 cylinder rotation drag. The disc detainer system in Protec2 cylinders is famously smooth when clean, but New York City’s fine construction dust and winter road salt tracked into entryways work into the mechanism. We see this most in pre-war Brooklyn walk-ups where the front door sits below sidewalk grade. Our fix: full cylinder disassembly, ultrasonic cleaning, and re-lubrication with Abloy-specified medium - not WD-40, which gums up disc detainers inside six months. Rekey at the same time if you’ve lost a key or had a tenant turnover.
• Sento electronic lock battery corrosion. The Sento line’s battery compartment sits low on the interior escutcheon, and in New York City’s humid July-August stretch, condensation builds behind the cover plate. We’ve pulled units from Astoria co-ops where the contacts were green with oxidation. We clean the board, replace the harness if needed, and rekey the override cylinder so you’re not locked out when the electronics fail.
• Exec keyway wear in high-traffic commercial settings. The original Exec series is still common in Manhattan office buildings from the 1990s. The keyway walls thin out after twenty years of daily use, and copied keys start hanging up. We can rekey to a fresh Exec keyway if the housing is sound, or upgrade the cylinder to Protec2 while keeping your existing hardware - a cost move many building managers in New York City prefer over full replacement.
• Padlock shackle seizure on exterior gates. Abloy’s PL330 and PL340 padlocks use the same disc detainer core, but the shackle tolerances are tight. In New York City, the temperature swing from a 20-degree January night to a 55-degree afternoon causes expansion contraction that binds the shackle at the shoulder. We disassemble, deburr the contact point, and rekey the core if keys are missing. For fire-escape gates, we check that our work keeps the lock compliant with FDNY egress requirements.
• Biometric reader false rejection on Abloy’s newer smart locks. The capacitive sensors in Abloy’s latest electronic offerings struggle with dry winter skin and the callus patterns common in older New York City homeowners - our core demographic. We recalibrate sensitivity, update firmware where possible, and always verify that the mechanical override cylinder is keyed and functional before we leave. Rekeying that override is standard on every install we do.

Our Abloy Lock Installation & Rekey Process

1. 1
   You call, we answer. A live person at Strongbox Lock & Safe Co. takes your call, asks which Abloy series you have, and quotes a flat price range based on the work described. No dispatch fee surprises.
2. 2
   Technician arrival with ID. Our background-checked, uniformed tech arrives in a marked van, presents ID at your door, and confirms the quoted price before touching anything.
3. 3
   Diagnostics on your actual hardware. We identify the series, manufacturing date (Abloy changed some internal specs around 2015), and whether your issue is mechanical, electronic, or both.
4. 4
   Parts decision: OEM or verified aftermarket. For Protec2 and Exec, we stock genuine Abloy cylinders and key blanks. For discontinued lines, we source quality aftermarket equivalents that maintain security grade - we tell you which we’re using and why.
5. 5
   The work, tested six ways. Rekey means new pin discs or a new cylinder, cut keys, and function-testing every key in every position. Installation means door prep, strike alignment, and verifying latch/deadbolt throw in summer and winter frame positions.
6. 6
   Written 90-Day Done Right Promise. You get a printed guarantee before we leave. If something’s not right, we come back. No paperwork to file, no argument.

What Abloy Lock Installation & Rekey Costs in New York City

These are real ranges for work we’ve done in Manhattan, Brooklyn, Queens, and the Bronx this past year:

What moves the price: door condition (solid core vs. metal door requiring carbide bits), cylinder grade (Protec2 costs more than Exec), and whether we need to extract a broken key or drill a seized cylinder first. We tell you before we start.

Call (877) 691-7931 for a free estimate - the price we quote is the price on the invoice.

Why New York City Homeowners Call Strongbox Lock & Safe Co. of New York City for Abloy Work

We’ve been in New York City for over 42 years. Frank Bellomo grew up in Bensonhurst watching his uncle rekey apartment locks on Bay Ridge Avenue, and that same practical approach runs through our shop today. Our technicians know Abloy’s disc detainer system isn’t a pin-tumbler with better marketing - it’s a different animal that takes different tools and different training.

If your Abloy hardware can’t be saved, we also work with Schlage, Kwikset, and Medeco, so we recommend what’s right for your door rather than what we happen to stock. Flat price before the truck rolls, and every job backed in writing - that’s how we’ve done it for over 42 years.

FAQs